The Base Cover (ADC-VACC-724-BC) is a molded polymer that snaps securely around the ADC-V724/724X screw mounting plate. The Base Cover is designed with the same color and materials as the camera and enhances the aesthetics by covering the screws. 

Installation

1. Only perform this step if running the power cable down the wall. Use pliers to snap off the notched piece of plastic on the base cover. This is where the power cable will be routed and will be aligned with the matching feature on the screw mounting plate.
2. Separate the cover at the middle seams.
3. Place the cover around the screw mounting plate of an already mounted ADC-V724/724X.
4. Reattach the two sides of the cover by pushing them together until the pieces snap into place.

Check out the LED Guide.